PIUSI FOLLOWER GREASE PLATE 590 MM DIAM. (23.2″) FOR DRUMS Part F20607000

Description

Piusi Follower Grease Plate – 590 mm Diameter

Part is original to Piusi.

Product Code: F20607000

Includes

• (1) Heavy-Duty Steel Follower Plate (590 mm)
• (1) Integrated Rubber Scraper Lip
• (1) Central Suction Tube Grommet

Optimize your grease recovery and protect your pneumatic pumps with the Piusi Follower Grease Plate. Designed for high-volume industrial and automotive service centers, this essential accessory is the most effective way to ensure your grease system operates at peak efficiency. By creating a physical seal inside your lubricant container, the follower plate forces grease toward the pump’s suction tube, eliminating the “tunneling” effect that leads to pump cavitation and air pockets.

The F20607000 features a large 590 mm (23.2″) diameter, specifically engineered to fit standard 400 lb (180 kg) / 55-gallon grease drums.

Key Features & Benefits

• Prevents Pump Cavitation: As the grease level drops, the follower plate uses atmospheric pressure and the pump’s vacuum to stay firmly against the surface of the lubricant. This prevents “holes” from forming in the grease, ensuring a continuous, air-free flow to your dispensing nozzles.
• Maximizes Grease Recovery: The flexible rubber membrane on the outer edge acts as a squeegee, wiping the inner walls of the drum clean as it descends. This significantly reduces waste, allowing you to extract nearly 100% of the high-value grease you’ve paid for.
• Contamination Barrier: By covering the exposed surface of the grease, the plate acts as a primary shield against shop dust, metal shavings, and moisture. This is critical for protecting sensitive bearings and high-pressure pump seals from abrasive particulates.
• Heavy-Duty Steel Construction: The core of the plate is manufactured from reinforced steel to provide the weight and rigidity necessary to “prime” high-viscosity greases (up to NLGI #3).
• Universal 1.2″ (30 mm) Center Opening: Features a precision-sized center grommet designed to fit the suction tubes of most standard pneumatic grease pumps, providing a snug, airtight seal.
• Industrial Durability: Finished with a corrosion-resistant coating, this plate is built to survive the repetitive swapping of drums in a high-demand service environment.

Technical Specifications

In a large 400 lb drum, grease is often too thick to level itself out. Without a Piusi F20607000, your pump will eventually suck air through a “cone” in the center, even if the drum is half full. This causes “sputtering” at the nozzle and can lead to dry-running your pump, which causes expensive internal wear. The follower plate is a low-cost insurance policy that guarantees consistent performance and a cleaner workspace.