Mi-T-M SEAL COMPACTION RING – BRASS Part 46-1491

Description

Mi-T-M SEAL COMPACTION RING – BRASS Part 46-1491

Lock in your pressure, eliminate destructive leaks, and restore peak performance with factory-certified OEM Mi-T-M replacement seals and gaskets. In commercial pressure washers, air compressors, and heavy-duty pumps, seals and gaskets do the hardest, most punishing work. They are the only barrier keeping high-pressure water, compressed air, and vital lubricating oils exactly where they belong. Settling for cheap, aftermarket paper gaskets or generic rubber packings often leads to immediate blowouts, milky pump oil, or total loss of compression. Genuine Mi-T-M OEM seals and gaskets are precision-cut and molded to exact factory tolerances using advanced industrial materials, guaranteeing a flawless, leak-proof fit that restores your equipment to its original, factory-rated output.

Key Features & Benefits

• Exact-Fit Engineering: Manufactured to the precise thickness and diameter required by your specific Mi-T-M pump or compressor head. This guarantees proper torquing, perfect cylinder spacing, and a zero-leak seal.
• Extreme-Duty Materials: Constructed from premium industrial materials—such as Teflon, Viton, Kevlar-reinforced graphite, and high-temp silicone—designed to survive aggressive detergents, extreme friction, and blistering jobsite temperatures.
• Restored Compression & PSI: Worn high-pressure water seals (V-packings) or blown compressor head gaskets bleed off your power. OEM replacements immediately restore your machine’s ability to build and hold maximum pressure.
• Cross-Contamination Prevention: OEM oil seals and low-pressure water seals fit tightly around plungers and crankshafts, ensuring that water never enters your pump’s crankcase to destroy the bearings.

Common Replacement Components

This category covers the essential internal sealing components for Mi-T-M engines, pumps, and compressors:

• High & Low-Pressure Water Seals (V-Packings): The critical seals inside your pressure washer pump manifold that build PSI and keep water out of the oil.
• Compressor Head & Valve Plate Gaskets: High-heat gaskets that seal the air cylinder, allowing your compressor to efficiently build tank pressure.
• Oil Seals: Durable, spring-loaded lip seals that keep lubricating oil locked inside the pump or engine crankcase.
• Engine Gaskets: Crankcase cover gaskets, carburetor gaskets, and exhaust gaskets for continuous, safe engine operation.

Compatibility

Genuine Mi-T-M seals and gaskets are available for the entire lineup of Mi-T-M industrial equipment, including direct and belt-drive pressure washer pumps (General Pump, AR, and Mi-T-M brand), single and two-stage air compressors, and portable generators.

Warning: Internal pump and compressor tolerances are exact down to the thousandth of an inch. You must strictly cross-reference your specific equipment model number and pump variation with your Mi-T-M parts breakdown before ordering to ensure correct fitment.

Pro Tip: The number one cause of premature gasket failure is improper installation. Before installing a new head gasket or crankcase seal, you must ensure both mating surfaces are 100% clean, flat, and free of old gasket material or deep scratches. When installing high-pressure water seals (V-packings) into a pressure washer pump, always coat the seals and the ceramic plungers lightly with a premium silicone grease to prevent them from burning up dry during the first startup.