Mi-T-M O-Ring Part 25-0337

Description

Mi-T-M O-Ring Part 25-0337

Eliminate pressure loss, stop frustrating leaks, and protect your equipment with factory-certified OEM Mi-T-M replacement O-rings. In high-pressure systems, a compromised seal is more than just a nuisance—it drastically reduces your equipment’s performance and can lead to dangerous blowouts. While generic hardware store O-rings might look identical to the naked eye, they almost always lack the precise durometer (hardness), crush-resistance, and chemical stability required to survive commercial pressure washing or air compression. Genuine Mi-T-M OEM O-rings are engineered to exact factory tolerances, ensuring a flawless, watertight, and airtight seal under extreme PSI and temperature fluctuations.

Key Features & Benefits

Precision Engineering: Manufactured to exact dimensional tolerances. A perfect OEM fit means no pinching, rolling, or premature blowouts when snapping together quick-connects or assembling pump components.
Commercial-Grade Elastomers: Constructed from premium industrial materials (such as Buna-N, Viton, or EPDM) specifically chosen to resist rapid degradation from harsh detergents, pump oils, and petroleum-based solvents.
High-Pressure & Heat Rated: Engineered to withstand the immense static and dynamic pressures generated by industrial equipment, with specific OEM variations strictly rated for extreme hot-water and steam applications.
Restored Performance: Quickly and affordably fixes sputtering wands, weeping quick-connects, and sudden pressure drops, ensuring your machine delivers its maximum rated output to the surface.

Common Replacement Areas

O-rings are the critical barrier keeping your high-pressure systems sealed. This OEM category covers seals for:

Quick-Connect Fittings: High-wear seals for hose ends, spray guns, wands, and nozzles.
Pump Manifolds: Internal water seals for the high-pressure pump head.
Unloader Valves & Injectors: Precision seals that regulate pressure and chemical draw.
Filter Bowls & Strainers: Keeping air out of your water intake system.

Compatibility

Genuine Mi-T-M O-rings are available as direct replacements for fittings and internal components across the entire Mi-T-M lineup of hot and cold water pressure washers, air compressors, and water treatment systems.

Warning: O-ring sizing is exact down to the fraction of a millimeter. You must cross-reference your specific equipment model number with your Mi-T-M parts diagram to ensure you order the exact internal or external diameter and material required for your application.

To drastically extend the life of your new quick-connect O-rings and prevent them from tearing, rolling, or unseating during installation, lightly coat them with a specialized O-ring lubricant or dielectric silicone grease. Never use petroleum-based lubricants (like standard WD-40 or motor oil) on rubber O-rings, as the petroleum will cause the rubber to swell, soften, and quickly disintegrate!